Reads every article you list, writes a summary and the key points, and files each one as a page in your Notion database.
Uses
Claude
Notion
Turn your reading list into Notion notes
Set articleLinks to blank.Set articleLinks to blank.Set notionDatabaseName to blank.Set notionDatabaseName to blank.Set readingFocus to General reading. Capture what the article argues, what it bases that on, and what is worth remembering a month from now..Set readingFocus to General reading. Capture what the article argues, what it bases that on, and what is worth remembering a month from now..Set titlePropertyName to Name.Set titlePropertyName to Name.Set pageCharacterLimit to 18000.Set pageCharacterLimit to 18000.
Make notionDatabaseName lowercase and save it as wantedDatabaseName.Make notionDatabaseName lowercase and save it as wantedDatabaseName.NotionList databases. Save it as databaseMatches.List databases. Save it as databaseMatches.Set notionDatabaseId to blank.Set notionDatabaseId to blank.
For each databaseEntry in databaseMatches.databases:For each databaseEntry in databaseMatches.databases:
If a step below fails, save the error as databaseEntryErrorIf a step below fails, save the error as databaseEntryErrorTry
Make databaseEntry.name lowercase and save it as entryName.Make databaseEntry.name lowercase and save it as entryName.
If entryName is wantedDatabaseName and notionDatabaseId is emptyIf entryName is wantedDatabaseName and notionDatabaseId is emptyYes
Trim databaseEntry.id and save it as notionDatabaseId.Trim databaseEntry.id and save it as notionDatabaseId.No
No steps
On error
Show in the output: Ignored a Notion database with no readable name or id..Show in the output: Ignored a Notion database with no readable name or id..If notionDatabaseId is emptyIf notionDatabaseId is emptyYes
Stop and report a problem: No Notion database called '@notionDatabaseName' is shared with your Notion integration. Open the database in Notion, use the ... menu then 'Add connections' to share it, check the name in the 'notionDatabaseName' step matches it exactly, then run it again.Stop and report a problem: No Notion database called '@notionDatabaseName' is shared with your Notion integration. Open the database in Notion, use the ... menu then 'Add connections' to share it, check the name in the 'notionDatabaseName' step matches it exactly, then run it again.No
No steps
Set existingPages to {results:[]}.Set existingPages to {results:[]}.If a step below fails, save the error as existingPagesErrorIf a step below fails, save the error as existingPagesErrorTry
NotionFind pages in notionDatabaseId. Save it as existingPages.Find pages in notionDatabaseId. Save it as existingPages.On error
Show in the output: Could not read what is already in '@notionDatabaseName', so an article you have already filed may be filed again - existingPagesError.message.Show in the output: Could not read what is already in '@notionDatabaseName', so an article you have already filed may be filed again - existingPagesError.message.Set filedTitles to "Set filedTitles to
.For each existingPage in existingPages.results:For each existingPage in existingPages.results:If a step below fails, save the error as existingTitleErrorIf a step below fails, save the error as existingTitleErrorTry
Make existingPage.title lowercase and save it as existingTitle.Make existingPage.title lowercase and save it as existingTitle.If existingTitle isn't emptyIf existingTitle isn't emptyYes
Change filedTitles to filedTitles@existingTitleChange filedTitles to filedTitles@existingTitle
.No
No steps
On error
Show in the output: Ignored a page in the database with no readable title..Show in the output: Ignored a page in the database with no readable title..Set notesFiled to 0.Set notesFiled to 0.Set readLinks to "Set readLinks to
.For each articleEntry in articleLinks with "For each articleEntry in articleLinks with
replaced by , split by ,:Trim articleEntry and save it as articleUrl.Trim articleEntry and save it as articleUrl.If articleUrl is emptyIf articleUrl is emptyYes
Skip to the next item.Skip to the next item.No
No steps
If articleUrl doesn't start with http (ignoring case) or articleUrl doesn't…If articleUrl doesn't start with http (ignoring case) or articleUrl doesn't…If readLinks contains articleUrlIf readLinks contains articleUrlYes
Show in the output: Skipped articleUrl because the same address is listed more than once.Show in the output: Skipped articleUrl because the same address is listed more than once.Skip to the next item.Skip to the next item.No
No steps
Change readLinks to readLinks@articleUrlChange readLinks to readLinks@articleUrl
.Set pageSource to blank.Set pageSource to blank.Set pageReached to false.Set pageReached to false.If a step below fails, save the error as fetchErrorIf a step below fails, save the error as fetchErrorTry
Fetch articleUrl and save it as pageResponse.Fetch articleUrl and save it as pageResponse.Change pageReached to pageResponse.ok.Change pageReached to pageResponse.ok.Trim pageResponse.body and save it as pageSource.Trim pageResponse.body and save it as pageSource.On error
Show in the output: Could not open the article - fetchError.message with articleUrl replaced by the article address.Show in the output: Could not open the article - fetchError.message with articleUrl replaced by the article address.If pageReached isn't yes or pageSource is emptyIf pageReached isn't yes or pageSource is emptyYes
Show in the output: Skipped articleUrl because it did not return a readable page.Show in the output: Skipped articleUrl because it did not return a readable page.Skip to the next item.Skip to the next item.No
No steps
Shorten pageSource to pageCharacterLimit characters (keeping words whole) and save it as articleExcerpt.Shorten pageSource to pageCharacterLimit characters (keeping words whole) and save it as articleExcerpt.Set readingPrompt to You are writing one reading note about a single article, for someone who wants to remember what it said without opening it again.Set readingPrompt to You are writing one reading note about a single article, for someone who wants to remember what it said without opening it again.
What this reader is reading for:
readingFocus
Reply with plain lines and nothing else. No labels, no numbering, no bullet characters, no blank lines, no introduction and no closing summary.
Line 1: the article's own title, as written on the page. If the page has no clear title, write a short one naming the subject.
Line 2: the whole article summarised in three or four sentences, all on one line. Say what it argues and what it bases that on, not what it is 'about'.
Every line after that: one key point worth remembering, at most six of them, each a full sentence that stands on its own. Keep the specific numbers, names and claims - a point nobody could disagree with is not worth writing down.
Use only what is on the page below. If the page is a paywall notice, a cookie banner, a login screen or an error page rather than the article itself, reply with the single word SKIP and nothing else.
Article address: articleUrl
The page follows as raw HTML. Read the visible article text; ignore navigation, script blocks, style blocks and tracking tags.
articleExcerpt.Set readingNote to blank.Set readingNote to blank.If a step below fails, save the error as summaryErrorIf a step below fails, save the error as summaryErrorTry
ClaudeAsk Claude: readingPrompt. Save it as reading.Ask Claude: readingPrompt. Save it as reading.
Maximum response length: 1200Trim reading.response_text and save it as readingNote.Trim reading.response_text and save it as readingNote.On error
Show in the output: Could not summarise articleUrl - summaryError.message.Show in the output: Could not summarise articleUrl - summaryError.message.If readingNote is emptyIf readingNote is emptyYes
Show in the output: No reading note came back for articleUrl, so nothing was filed for it.Show in the output: No reading note came back for articleUrl, so nothing was filed for it.Skip to the next item.Skip to the next item.No
No steps
If readingNote in uppercase is SKIPIf readingNote in uppercase is SKIPYes
Show in the output: Skipped articleUrl because that address served a paywall, cookie or error page rather than the article.Show in the output: Skipped articleUrl because that address served a paywall, cookie or error page rather than the article.Skip to the next item.Skip to the next item.No
No steps
Set noteLines to an empty list.Set noteLines to an empty list.For each replyLine in readingNote split by a new line:For each replyLine in readingNote split by a new line:Trim replyLine and save it as cleanLine.Trim replyLine and save it as cleanLine.If cleanLine isn't emptyIf cleanLine isn't emptyYes
Add cleanLine to the end of noteLines and save it as noteLines.Add cleanLine to the end of noteLines and save it as noteLines.No
No steps
If the length of noteLines is less than 2If the length of noteLines is less than 2Yes
Show in the output: The reading note for articleUrl came back without both a title and a summary, so nothing was filed for it.Show in the output: The reading note for articleUrl came back without both a title and a summary, so nothing was filed for it.Skip to the next item.Skip to the next item.No
No steps
Shorten noteLines[0] to 190 characters (keeping words whole) and save it as articleTitle.Shorten noteLines[0] to 190 characters (keeping words whole) and save it as articleTitle.Shorten noteLines[1] to 1800 characters (keeping words whole) and save it as articleSummary.Shorten noteLines[1] to 1800 characters (keeping words whole) and save it as articleSummary.If filedTitles contains articleTitle in lowercaseIf filedTitles contains articleTitle in lowercaseYes
Show in the output: '@articleTitle' is already in '@notionDatabaseName', so it was left alone.Show in the output: '@articleTitle' is already in '@notionDatabaseName', so it was left alone.Skip to the next item.Skip to the next item.No
No steps
Set keyPointBlocks to an empty list.Set keyPointBlocks to an empty list.Set noteLineNumber to 0.Set noteLineNumber to 0.For each noteLine in noteLines:For each noteLine in noteLines:If noteLineNumber is greater than or equal to 2 and the length of keyPointBlocks…If noteLineNumber is greater than or equal to 2 and the length of keyPointBlocks…Yes
Add a record of object, type, and bulleted list item to the end of keyPointBlocks and save it as keyPointBlocks.Add a record of object, type, and bulleted list item to the end of keyPointBlocks and save it as keyPointBlocks.No
No steps
Add 1 to noteLineNumber.Add 1 to noteLineNumber.Set notePageBlocks to [a record of object, type, and paragraph].Set notePageBlocks to [a record of object, type, and paragraph].If keyPointBlocks isn't emptyIf keyPointBlocks isn't emptyYes
Add {object:block,type:heading_3,heading_3:{rich_text:[{type:text,text:{content:Key points}}]}} to the end of notePageBlocks and save it as notePageBlocks.Add {object:block,type:heading_3,heading_3:{rich_text:[{type:text,text:{content:Key points}}]}} to the end of notePageBlocks and save it as notePageBlocks.Combine notePageBlocks and keyPointBlocks into one list and save it as notePageBlocks.Combine notePageBlocks and keyPointBlocks into one list and save it as notePageBlocks.No
No steps
Add a record of object, type, and paragraph to the end of notePageBlocks and save it as notePageBlocks.Add a record of object, type, and paragraph to the end of notePageBlocks and save it as notePageBlocks.Set notePageFiled to false.Set notePageFiled to false.If a step below fails, save the error as fileErrorIf a step below fails, save the error as fileErrorTry
NotionCreate the page articleTitle in notionDatabaseId.Create the page articleTitle in notionDatabaseId.Change notePageFiled to true.Change notePageFiled to true.On error
Show in the output: Could not file '@articleTitle' in Notion - fileError.message.Show in the output: Could not file '@articleTitle' in Notion - fileError.message.If notePageFiled is yesIf notePageFiled is yesYes
Add 1 to notesFiled.Add 1 to notesFiled.Change filedTitles to filedTitles@articleTitle in lowercaseChange filedTitles to filedTitles@articleTitle in lowercase
.Show in the output: Filed '@articleTitle' in '@notionDatabaseName'.Show in the output: Filed '@articleTitle' in '@notionDatabaseName'.No
No steps
Show in the output: New reading notes filed in '@notionDatabaseName': notesFiled.Show in the output: New reading notes filed in '@notionDatabaseName': notesFiled.