Drafts an introduction email to each new HubSpot contact, written from what your CRM already knows about them.
Uses
Claude
Gmail
HubSpot
Introduce yourself to new CRM contacts
Run every day.Run every day.
Set aboutYou to blank.Set aboutYou to blank.Set senderName to blank.Set senderName to blank.Set lookBackDays to 3.Set lookBackDays to 3.Set maxContacts to 10.Set maxContacts to 10.Set sendAutomatically to blank.Set sendAutomatically to blank.
Move the current date and time by 0 minus lookBackDays days and save it as windowStart.Move the current date and time by 0 minus lookBackDays days and save it as windowStart.HubSpotFind contacts created since windowStart. Save it as newContacts.Find contacts created since windowStart. Save it as newContacts.Set contacts to newContacts.results.Set contacts to newContacts.results.
If contacts is emptyIf contacts is emptyYes
Stop and report a problem: HubSpot's answer had no list of contacts in it, so nobody could be checked this run. Check that the HubSpot connection is still working, then run it again.Stop and report a problem: HubSpot's answer had no list of contacts in it, so nobody could be checked this run. Check that the HubSpot connection is still working, then run it again.No
No steps
Reverse the order of contacts and save it as oldestFirst.Reverse the order of contacts and save it as oldestFirst.Set waitingCount to 0.Set waitingCount to 0.Set introductionProblems to an empty list.Set introductionProblems to an empty list.Start an empty list and save it as introducedThisRun.Start an empty list and save it as introducedThisRun.
For each contact in oldestFirst:For each contact in oldestFirst:Set crm to contact.properties.Set crm to contact.properties.Set rawEmail to crm.email.Set rawEmail to crm.email.If rawEmail is emptyIf rawEmail is emptyYes
Show in the output: Skipped a new HubSpot contact: the record has no email address on it..Show in the output: Skipped a new HubSpot contact: the record has no email address on it..Skip to the next item.Skip to the next item.No
No steps
Make rawEmail lowercase and save it as emailAddress.Make rawEmail lowercase and save it as emailAddress.If not emailAddress is a valid email addressIf not emailAddress is a valid email addressYes
Show in the output: Skipped a new HubSpot contact: '@emailAddress' is not a valid email address.Show in the output: Skipped a new HubSpot contact: '@emailAddress' is not a valid email address.Skip to the next item.Skip to the next item.No
No steps
If introducedThisRun contains emailAddressIf introducedThisRun contains emailAddressYes
Show in the output: Skipped emailAddress: that address appears more than once in this batch of new contacts and has already been handled.Show in the output: Skipped emailAddress: that address appears more than once in this batch of new contacts and has already been handled.Skip to the next item.Skip to the next item.No
No steps
GmailFind email matching 'from:emailAddress OR to:emailAddress'. Save it as previousMail.Find email matching 'from:emailAddress OR to:emailAddress'. Save it as previousMail.If previousMail.email isn't emptyIf previousMail.email isn't emptyYes
Show in the output: Skipped emailAddress: your mailbox already holds a message to or from this address, so they are not somebody to introduce yourself to.Show in the output: Skipped emailAddress: your mailbox already holds a message to or from this address, so they are not somebody to introduce yourself to.Skip to the next item.Skip to the next item.No
No steps
If the length of introducedThisRun is greater than or equal to maxContactsIf the length of introducedThisRun is greater than or equal to maxContactsYes
Add 1 to waitingCount.Add 1 to waitingCount.Skip to the next item.Skip to the next item.No
No steps
Add emailAddress to the end of introducedThisRun and save it as introducedThisRun.Add emailAddress to the end of introducedThisRun and save it as introducedThisRun.Add Email address: emailAddress to the end of a list of [] and save it as crmFacts.Add Email address: emailAddress to the end of a list of [] and save it as crmFacts.If crm.firstname isn't empty and crm.firstname isn't blankIf crm.firstname isn't empty and crm.firstname isn't blankYes
Add First name: crm.firstname to the end of crmFacts and save it as crmFacts.Add First name: crm.firstname to the end of crmFacts and save it as crmFacts.No
No steps
If crm.lastname isn't empty and crm.lastname isn't blankIf crm.lastname isn't empty and crm.lastname isn't blankYes
Add Last name: crm.lastname to the end of crmFacts and save it as crmFacts.Add Last name: crm.lastname to the end of crmFacts and save it as crmFacts.No
No steps
If crm.jobtitle isn't empty and crm.jobtitle isn't blankIf crm.jobtitle isn't empty and crm.jobtitle isn't blankYes
Add Job title: crm.jobtitle to the end of crmFacts and save it as crmFacts.Add Job title: crm.jobtitle to the end of crmFacts and save it as crmFacts.No
No steps
If crm.company isn't empty and crm.company isn't blankIf crm.company isn't empty and crm.company isn't blankYes
Add Company: crm.company to the end of crmFacts and save it as crmFacts.Add Company: crm.company to the end of crmFacts and save it as crmFacts.No
No steps
If crm.website isn't empty and crm.website isn't blankIf crm.website isn't empty and crm.website isn't blankYes
Add Website: crm.website to the end of crmFacts and save it as crmFacts.Add Website: crm.website to the end of crmFacts and save it as crmFacts.No
No steps
If crm.lifecyclestage isn't empty and crm.lifecyclestage isn't blankIf crm.lifecyclestage isn't empty and crm.lifecyclestage isn't blankYes
Add Lifecycle stage in our CRM: crm.lifecyclestage to the end of crmFacts and save it as crmFacts.Add Lifecycle stage in our CRM: crm.lifecyclestage to the end of crmFacts and save it as crmFacts.No
No steps
If crm.hs_analytics_source isn't empty and crm.hs_analytics_source isn't blankIf crm.hs_analytics_source isn't empty and crm.hs_analytics_source isn't blankYes
Add How they first found us: crm.hs_analytics_source to the end of crmFacts and save it as crmFacts.Add How they first found us: crm.hs_analytics_source to the end of crmFacts and save it as crmFacts.No
No steps
Join crmFacts with a new line and save it as crmSummary.Join crmFacts with a new line and save it as crmSummary.
If a step below fails, save the error as introductionErrorIf a step below fails, save the error as introductionErrorTry
ClaudeAsk Claude: 'You are writing the subject line of a first introduction email to somebody who has just been added to our CRM. They have never heard from us before.Ask Claude: 'You are writing the subject line of a first introduction email to somebody who has just been added to our CRM. They have never heard from us before.
Who the email is from, in their own words:
aboutYou
Everything our CRM records about this contact:
crmSummary
Write one subject line of at most nine words. Use only the facts above - never imply a meeting, a past conversation, a referral or a shared contact that is not stated there. Reply with the subject line and nothing else: no quotation marks, no explanation.'. Save it as subjectResponse.
Maximum response length: 60Replace with " in subjectResponse.response_text and save it as subject.Replace with " in subjectResponse.response_text and save it as subject.ClaudeAsk Claude: 'You are writing a short first introduction email to somebody who has just been added to our CRM. They have never heard from us before, so this is a genuine introduction and not a follow-up.Ask Claude: 'You are writing a short first introduction email to somebody who has just been added to our CRM. They have never heard from us before, so this is a genuine introduction and not a follow-up.
Who the email is from, in their own words:
aboutYou
Everything our CRM records about this contact:
crmSummary
Write the body of the email:
- Open with their first name if the CRM gives one, and with 'Hello,' if it does not.
- Say who you are and what you do, in the sender's own terms.
- Draw on what the CRM already knows about them - their role, their company, or how they first came to us - where it is genuinely relevant. Use at most one such detail; reciting everything we hold on somebody reads as surveillance rather than interest.
- Never invent a meeting, a referral, a shared contact or anything else the facts above do not state. If the CRM knows almost nothing about them, write a short honest introduction rather than guessing.
- Close with one low-pressure question or offer.
- Keep it under 150 words and sign off as senderName.
Reply with the body of the email and nothing else - no subject line, no explanation.'. Save it as bodyResponse.
Maximum response length: 700Trim bodyResponse.response_text and save it as introduction.Trim bodyResponse.response_text and save it as introduction.If subject is blank or introduction is emptyIf subject is blank or introduction is emptyYes
Add emailAddress: the AI's introduction came back empty, so nothing was drafted to the end of introductionProblems and save it as introductionProblems.Add emailAddress: the AI's introduction came back empty, so nothing was drafted to the end of introductionProblems and save it as introductionProblems.Skip to the next item.Skip to the next item.No
No steps
If sendAutomatically in lowercase is yesIf sendAutomatically in lowercase is yesYes
GmailSend an email to emailAddress.Send an email to emailAddress.
Subject: subjectintroductionShow in the output: Sent an introduction to emailAddress.Show in the output: Sent an introduction to emailAddress.No
GmailDraft an email to emailAddress.Draft an email to emailAddress.
Subject: subjectintroductionShow in the output: Left a draft introduction to emailAddress in Gmail for you to read and send.Show in the output: Left a draft introduction to emailAddress in Gmail for you to read and send.On error
Add emailAddress: introductionError.message to the end of introductionProblems and save it as introductionProblems.Add emailAddress: introductionError.message to the end of introductionProblems and save it as introductionProblems.Count the items in introducedThisRun and save it as preparedCount.Count the items in introducedThisRun and save it as preparedCount.If introductionProblems isn't emptyIf introductionProblems isn't emptyYes
Join introductionProblems with a new line and save it as problemList.Join introductionProblems with a new line and save it as problemList.Stop and report a problem: Some introductions could not be prepared. Each one is tried again on the next run while the contact is less than 'lookBackDays' old:Stop and report a problem: Some introductions could not be prepared. Each one is tried again on the next run while the contact is less than 'lookBackDays' old:
problemList.No
No steps
If waitingCount is greater than 0If waitingCount is greater than 0Yes
Finish the run: Introductions prepared: preparedCount. New contacts still waiting: waitingCount - they are picked up on the next run; raise 'maxContacts' to handle more in a day.Finish the run: Introductions prepared: preparedCount. New contacts still waiting: waitingCount - they are picked up on the next run; raise 'maxContacts' to handle more in a day.No
No steps
Finish the run: Introductions prepared: preparedCount.Finish the run: Introductions prepared: preparedCount.